ARCHIVE TABLE OF CONTENTS

September 20, 2002

C&H Technology and International Rectifier introduce the new INT-A-Pak (IAP) Rectifier-Switch family of 150A and 250A (ratings at 100°C) isolated modules optimized for high-current industrial switch-mode power supplies, such as the output inverter stage for high-quality tungsten inert gas (TIG) welding machines and uninterruptible power supplies (UPS).

For more information, go to: http://www.irf.com/whats-new/nr020919.html

Datasheets:
http://www.irf.com/product-info/datasheets/data/ga200hs60s.pdf
http://www.irf.com/product-info/datasheets/data/ga100ts60sq.pdf

C&H Technology and International Rectifier introduce a new series of 600V NPT IGBT Co-Packs offer improved ruggedness at a lower cost than previous generation devices. The new devices are rated at 5A, 7A, 12A or 20A, and come in Full-Pak, D2Pak, TO-220 and TO-262 packages. The new Co-Packs are designed for appliance and light industrial motor drive applications.

For more information, go to http://www.irf.com/whats-new/nr020702.html

March 12, 2002

C&H Technology and International Rectifier Announces New High Temperature-Rated Ultrafast Output Diodes for Industrial and Heavy-Duty Applications. The 70CRU04, a 70 amp, 400 volt ultrafast diode in a TO-218 package, with a 175 degree C operating temperature rating. The new device is designed for high frequency switching and output rectifier applications such as welding, switch-mode power supply (SMPS) and power conversion.

For more information, go to http://www.irf.com/whats-new/nr020226.html

March 1, 2002

C&H Technology and International Rectifier introduce new UFB120FA20 and the UFB120FA40 ultrafast recovery diode module. The 120A diodes have up to 11% faster recovery time than competing 200V devices and approximately 17% faster recovery time than competing 400V devices, and can maximize efficiency in high current applications, such as welding systems, power supplies and battery chargers.

For more information, go to http://www.irf.com/whats-new/nr020218.html

January 3, 2002

C&H Technology and International Rectifier Introduce new Three phase High Current, Low-Profile Bridge Rectifiers for Heavy-Duty and Industrial Use. The new MTP family of high current, three phase input bridge rectifiers are available immediately. The MTP bridge rectifier family consists of the 40MT (45A), 70MT (75A) and 100MT (100A). The bridge rectifiers have a repetitive peak reverse voltage rating of 1400V and 1600V.

Datasheets:
http://www.irf.com/product-info/datasheets/data/40mt160p.pdf

November 29, 2001

C&H Technology and International Rectifier Corporation introduced a new series of 320A and 400A standard-recovery, stud-mount rectifiers in the DO-9 package. The new devices expand IR's current line of DO-9 rectifiers with ratings from 50V to 3,200V and 300A to 400A. The devices are made for high-voltage, high-current industrial applications such as welding, battery chargers, power supplies and light-duty traction applications. These rectifiers are manufactured with a new process that combines brazed-die construction with compressed assembly. The new devices feature power-cycling performance and the ability to maintain stable forward-voltage characteristics.

Datasheets:
http://www.irf.com/datasheets/data/240U060D.pdf
http://www.irf.com/datasheets/data/400U080D.pdf  

September 18, 2001

International Rectifier and C&H Technology introduce two new ultrafast rectifiers in the SOT-227 package for output rectification circuits in high current applications, such as welding, power supplies and battery chargers.

For the full story, click here:
http://www.irf.com/e/w010912.html

August 13, 2001

International Rectifier Corp. announced a new process technology for IGBTs and FREDs that is claimed to deliver 70 percent faster turn-off times than previous-generation devices and more than 20 percent lower power losses. The new technology is optimized for IGBTs and FREDs used in bridge-type inverters found in motor drives, welders and UPSs.

For the full story, click here:
http://www.irf.com/e/w010625.html

NEW PRODUCTS

Engineering samples are now available!

has develop a new family of diodes for the resistance welding industry. The 56mm diameter silicon junction is designed to have a very low forward voltage drop, with blocking voltages up to 400V. This diode is available in four different packages depending on your application.

    International Rectifier now has a CONTROL I.C. Designer's Manual focused on motor drive and appliance applications.  The manual contains: